Juniper ACX1000 Configuration Manual page 1883

show bgp neighbor neighbor-address (BGP Long-Lived Graceful Restart)
Copyright © 2017, Juniper Networks, Inc.
Last State: Idle
Last Error: None
Options: <Preference LocalAddress AddressFamily Rib-group Refresh>
Options: <LLGR>
Address families configured: l2vpn
Local Address: 10.255.255.12 Holdtime: 90 Preference: 170
NLRI l2vpn:
Number of flaps: 6
Last flap event: Restart
NLRI we are holding stale routes for: inet-vpn-unicast
Time until stale routes are deleted or become long-lived stale: 00:01:57
Time until end-of-rib is assumed for stale routes: 00:04:43
Table bgp.l3vpn.0
RIB State: BGP restart is complete
RIB State: VPN restart is complete
Send state: not advertising
Active prefixes:
Received prefixes:
Accepted prefixes:
Suppressed due to damping:
Table foo.inet.0 Bit: 30000
RIB State: BGP restart is complete
RIB State: VPN restart is complete
Send state: not in sync
Active prefixes:
Received prefixes:
Accepted prefixes:
Suppressed due to damping:
user@router> show bgp neighbor 10.4.12.11
Peer: 10.4.12.11 AS 100
Type: Internal State: Active
Last State: Idle
Last Error: None
Export: [ foo ]
Options: <Preference LocalAddress Refresh GracefulRestart>
Options: <LLGR>
Local Address: 10.6.128.225 Holdtime: 90 Preference: 170
Number of flaps: 3
Last flap event: Restart
Error: 'Cease' Sent: 0 Recv: 1
Time until long-lived stale routes deleted: inet-vpn-unicast 10:00:22
route-target 10:00:22
Table bgp.l3vpn.0
RIB State: BGP restart is complete
RIB State: VPN restart is complete
Send state: not advertising
Active prefixes:
Received prefixes:
Accepted prefixes:
Suppressed due to damping:
Table foo.inet.0 Bit: 30000
RIB State: BGP restart is complete
RIB State: VPN restart is complete
Send state: not in sync
Active prefixes:
Received prefixes:
Chapter 42: Operational Commands
Last Event: Start
0
7
7
0
0
7
7
0
Local: 10.6.128.225 AS 100
Flags: <>
Last Event: Start
0
7
7
0
0
7
1825