Show Chassis Craft-Interface - Juniper ACX1000 Configuration Manual

show chassis craft-interface

List of Syntax
Syntax
Syntax (MX Series
Routers)
Syntax (MX104,
MX2010, MX2020, and
MX2008 3D Universal
Edge Routers)
Syntax (TX Matrix
Routers)
Syntax (TX Matrix Plus
Routers)
Syntax (ACX Series
Universal Access
Routers)
Release Information
Description
Options
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 1865
Syntax (MX Series Routers) on page 1865
Syntax (MX104, MX2010, MX2020, and MX2008 3D Universal Edge Routers) on page 1865
Syntax (TX Matrix Routers) on page 1865
Syntax (TX Matrix Plus Routers) on page 1865
Syntax (ACX Series Universal Access Routers) on page 1865
show chassis craft-interface
show chassis craft-interface
<all-members>
<local>
<member member-id>
show chassis craft-interface
show chassis craft-interface
<lcc number | scc>
show chassis craft-interface
<lcc number | sfc number>
show chassis craft-interface
Command introduced before Junos OS Release 7.4.
option for the TX Matrix Plus router introduced in Junos OS Release 9.6.
sfc
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2020 3D Universal Edge Routers.
Command introduced in Junos OS Release 12.3 for MX2010 3D Universal Edge Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for vMX on NFX250 Network Services
Platform.
For routers or switches that have a display on the craft interface, show the messages
that are currently displayed. On all routers except for the M20 router, you must enter this
command on the master Routing Engine.
none—(TX Matrix, TX Matrix Plus routers, MX104, MX2010, MX2020, and MX2008 routers,
and ACX Series routers only) On a TX Matrix router, show messages that are currently
Chapter 42: Operational Commands
1865