Rib-Group (Routing Options) - Juniper ACX1000 Configuration Manual

rib-group (Routing Options)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
rib-group group-name;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options interface-routes],
[edit logical-systems logical-system-name routing-options interface-routes],
[edit logical-systems logical-system-name routing-options rib routing-table-name static],
[edit logical-systems logical-system-name routing-options static],
[edit routing-instances routing-instance-name routing-options interface-routes],
[edit routing-options interface-routes],
[edit routing-options rib routing-table-name static],
[edit routing-options static]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Configure which routing table groups interface routes are imported into.
—Name of the routing table group. The name must start with a letter and
group-name
can include letters, numbers, and hyphens. It generally does not make sense to
specify more than a single routing table group.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Importing Direct and Static Routes Into a Routing Instance
Example: Exporting Specific Routes from One Routing Table Into Another Routing Table
interface-routes on page 1574
rib-groups
Chapter 41: Configuration Statements
1701