Enabling E-Lmi On An Interface And Mapping Ce Vlan Ids To An Evc - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
1116
You can configure an EVC by including the
hierarchy level:
ethernet]
[edit protocols oam ethernet]
evcs evc-id {
evc-protocol (cfm management-domain name management-association name faults
rdi; | l2circuit interface interface-name | l2vpn interface interface-name;)
remote-uni-count count; # Optional, defaults to 1
async-status-msg-transmit-interval interval (1ms|1000ms) ; # Defaults to 10ms.
}

Enabling E-LMI on an Interface and Mapping CE VLAN IDs to an EVC

To configure E-LMI, include the
hierarchy level:
[edit protocols oam ethernet]
lmi {
polling-verification-timer value;
# Polling verification timer (T392), defaults to 15 seconds
status-counter count; # Status counter (N393), defaults to 4
interface name {
evc evc-id {
default-evc;
vlan-list [ vlan-ids ];
}
evc-map-type (all-to-one-bundling | bundling | service-multiplexing);
polling-verification-time value; # Optional, defaults to global value
status-counter count; # Optional, defaults to global value
uni-id value; # Optional, defaults to interface-name
}
}
You can set the status counter to count consecutive errors by using the
count statement at the [edit protocols oam ethernet lmi]
counter is used to determine whether E-LMI is operational or not. The default value is 4.
You can set the
polling-verification-timer value
ethernet lmi] hierarchy level. The default value is 15 seconds.
You can enable an interface and set its options for use with E-LMI by using the
name statement at the [edit protocols oam ethernet lmi]
ae interfaces are supported. You can use the interface
for the UNI. If is not configured, it defaults to the name variable in the
uni-id
name statement.
You can specify the CE-VLAN ID and EVC map type by using the
interface option. The options are
Service multiplexing is with no bundling. The default type is
To specify the EVC that an interface uses, use the
protocols oam ethernet lmi interface name]
as the default EVC interface by using the
oam ethernet lmi interface name evc evc-id]
evcs statement at the
lmi statement at the [edit protocols oam ethernet]
hierarchy level. The status
statement at the
hierarchy level. Only ge, xe, and
uni-id
all-to-one-bundling , bundling
evc evc-id
hierarchy level. You can specify an interface
statement at the
default-evc
hierarchy level. All VLAN IDs that are not
Copyright © 2017, Juniper Networks, Inc.
[edit protocols oam
status-counter
[edit protocols oam
interface
option to specify a name
interface
evc-map-type type
, and service-multiplexing
.
all-to-one-bundling
statement at the
[edit
[edit protocols
.