Source-Address (Routing Options) - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

source-address (Routing Options)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1722
source-address address;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options dynamic-tunnels tunnel-name,
[edit logical-systems logical-system-name
[edit routing-instances routing-instance-name
[edit routing-options dynamic-tunnels tunnel-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Specify the source address for the generic routing encapsulation (GRE) tunnels. The
source address specifies the address used as the source for the local tunnel endpoint.
This address can be any local address on the router, typically the router ID or the loopback
address.
—Name of the source address.
address
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring GRE Tunnels for Layer 3 VPNs
routing-options dynamic-tunnels tunnel-name],
routing-options dynamic-tunnels tunnel-name],
Copyright © 2017, Juniper Networks, Inc.