Juniper ACX1000 Configuration Manual page 1432

ACX Series Universal Access Router Configuration Guide
Verifying the Results of the Benchmarking Test for NNI Direction of an Ethernet Pseudowire
Service
1374
profiles {
test-profile throughput {
test-type throughput
packet-size 64;
test-duration 20m;
bandwidth-kbps 500;
}
}
tests {
test-name test1 {
interface ge-0/0/0.1;
test-profile throughput;
mode initiate,terminate;
family ccc;
direction nni;
}
}
}
Configuring Benchmarking Test Parameters on Router B:
[edit interfaces]
ge-0/0/4 {
vlan-tagging;
unit 0 {
encapsulation vlan-ccc;
vlan-id 101;
}
}
[edit services rpm]
rfc2544-benchmarking {
# Note, When in reflector mode, test profile is not needed
tests {
test-name test1 {
interface ge-0/0/4.1;
mode reflect;
family ccc;
direction nni;
}
}
}
After you have configured the device, enter the
Examine the results of the benchmarking test that is performed on the configured service
between Router A and Router B.
Verifying the Benchmarking Test Results on page 1375
commit command in configuration mode.
Copyright © 2017, Juniper Networks, Inc.