Toyota 3S-GE Repair Manual page 44

EG-30
ENGINE — ENGINE MECHANICAL
'l7%<
re//\
/(<3/"
Z KI'/\
c K Q @
Fri l<—\P18001
8 '_,
/§
W
\f<»"
\.8"
ta
10 W 2 3'
Q1r L > W
.9 8
\ ~@/>*%%//\
P175986 /' & 212983
MP
\\ /
/
\ EM0050
&\
\ at
J
/A \\_/
P1"/991
(e) Install the bearing caps in their proper locations.
HINT: Each bearing cap has a number and front mark.
(f) Apply a light coat of engine oil on the threads and
under the heads of the bearing cap bolts.
(g) Install and uniformly tighten the 10 bearing cap bolts
on one side in several passes, in the sequence shown.
Torque: 19 N-m (190 kgf-cm. 14 ft-Ibf)
M. Check valve clearance
Turn the camshaft and position the cam lobe upward,
and check and adjust the valve clearance.
Valve clearance (Cold):
Intake
0.15 — 0.25 mm (0.006 — 0.010 in.)
Exhaust
0.28 — 0.38 mm (0.011 — 0.015 in.)
N. Reinstall camshaft oil seals
(a) Apply MP grease to a new oil seal lip.
(b) Using SST, tap in the 2 camshaft oil seals.
SST 09223-46011