Toyota 3S-GE Repair Manual page 6

i f : . = ' § z=2=%i = ==i z f : i = ==i z i z i § :
'N4 INTRODUCTION —— IDENTIFICATION INFORMATION
CAUTIONS. NOTICES. HINTS:
IIOOI -01
O CAUTIONS are presented in bold type, and indicate there is a possibility of injury to you or other
people.
0 NOTICES are also presented in bold type, and indicate the possibility of damage to the compo-
nents being repaired.
O HINTS are separated from the text but do not appear in bold. They provide additional information
to help you efficiently perform the repair.
lllO0P—°l
SI UNIT
The UNIT given in this manual are primarily expressed with the SI UNIT (International System of
Unit), and alternately expressed in the metric system and in the yard/pound system.
Example:
Torque: 30 N-m (310 kgf-cm. 22 ft-lbf)
IDENTIFICATION INFORMATION MW.
ENGINE SERIAL NUMBER
)/ \ C The engine serial number is stamped on the engine
W "'
block as shown.
'\
Q9 W,