EG-380
ENGINE — LUBRICATION SYSTEM
OIL AND FILTER REPLACEMENT
CAUTION:
EOIl0—06
Prolonged and repeated contact with mineral oil will
result in the removal of natural fats from the skin,
leading to dryness, irritation and dermatitis. In addi-
tion. used engine oil contains potentially harmful
contaminants which may cause skin cancer.
Care should be taken, therefore. when changing
engine oil to minimize the frequency and length of
time your skin is exposed to used engine oil. Protec-
tive clothing and gloves that cannot be penetrated
by oil should be worn. The skin should be thoroug-
thly washed with soap and water, or use water-
less hand cleaner, to remove any used engine oil. D0
not use gasoline, thinners. or solvents.
In order to preserve the environment. used oil and
used oil filters must be disposed of only at designa-
ted disposal sites.
IN ENGINE OIL
ove the oil filler cap
/
/
1.
DRA
Qf
EA
(a)
Rem
' '
.
v
(b)
Remove the oil drain plug, and drain the oil into a
container.
I i
\
e
(cg./<4k
\1
L
Pl682O
E
t
I
KW
2.
REPLACE OIL FILTER
(a)
Using SST, remove the oil filter.
SST 09228-06500
(b) Clean the oil filter contact surface on the oil filter
mounting.
\
Need help?
Do you have a question about the 3S-GE and is the answer not in the manual?