Toyota 3S-GE Repair Manual page 395

ENGINE — LUBRICATION SYSTEM EG_381
/ a~ ' (c) Lubricate the filter rubber gasket with clean engine
¢/
\
T l ' 5 °' t >
Clean
Engine
Oil
9
r P0415?
@ D
I
E .4
~@\>» J.
(d) Tighten the oil filter by hand until the rubber gasket
contacts the seat of the filter mounting.
(e) Using SST, give it an additional 3/4 turn to seat the
Q§/ sst LL!
[0 filter.
' Q N 3/4 SST 09228-06500 _
I. dk Turn
\a( /
/ I
@ (a) Clean and install the oil drain plug wi a new gas e .
Y Torque: 37 N-m (380 kgf-cm. 27 ft-Ibf)
(b) Fill with new engine oil.
A ' I ' 5 A Oil grade: A
' See step 1 on page EG—379)
\ v' Capacity:
' Drain and refill
\ . .
)\ _Z
/ P16823
' 3 FILL WITH ENGINE QII.
'll'! I< t
1\ M6819 w/ Oil filter change
4.5 liters (4.8 US qts, 4.0 Imp. qts)
w/o Oil filter change
4.0 liters (4.2 US qts, 3.5 Imp. qts)
Dry fill
5.2 liters (5.5 US qts, 4.6 Imp. qts)
(c) Reinstall the oil filler cap.
4. START ENGINE AND CHECK FOR OIL LEAKS
5. RECHECK ENGINE OIL LEVEL