Allied Telesis x510-28GTX Command Reference Manual page 723

L A C
INK GGREGATION OMMANDS
- -
STATIC CHANNEL GROUP
To reference static channel group 2 as an interface, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To make it possible to use QoS Storm Protection on static channel group 2 on
port1.0.6, with an ACL named "test-acl", use the commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
Related show static-channel-group
Commands
C613-50170-01 Rev B
configure terminal
interface sa2
configure terminal
interface port1.0.6
static-channel-group 2 member-filters
access-group test-acl
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
723