Allied Telesis x510-28GTX Command Reference Manual page 692

S T C
PANNING REE OMMANDS
-
SPANNING TREE PORTFAST BPDU
Use the
configurations for the BPDU Guard feature. It shows both the administratively
configured and currently running values of bpdu-guard.
Example To enable STP BPDU guard in Global Configuration mode, enter the below
commands:
awplus#
awplus(config)#
To enable STP BPDU guard in Interface Configuration mode, enter the below
commands:
awplus#
awplus(config)#
awplus(config-if)#
Related spanning-tree edgeport (RSTP and MSTP)
Commands
show spanning-tree
spanning-tree portfast (STP)
spanning-tree portfast bpdu-filter
C613-50170-01 Rev B
-
GUARD
show spanning-tree
configure terminal
spanning-tree portfast bpdu-guard
configure terminal
interface port1.0.2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command to display the device and port
spanning-tree portfast bpdu-guard enable
692