AudioCodes Mediant 800B MSBR User Manual page 94

Mediant 800B MSBR
Communication is typically established by the CPE; hence, messages from CPE to ACS
are typically carried in HTTP requests, and messages from ACS to CPE in HTTP
responses.
Figure 11-1: TR-069 Session Example
Communication between ACS and CPE is defined via Remote Procedure Call (RPC)
methods. TR-069 defines a generic mechanism by which an ACS can read or write
parameters to configure a CPE and monitor CPE status and statistics. It also defines the
mechanism for file transfer and firmware/software management. However, it does not
define individual parameters; these are defined in separate documents, as described
below. Some of the RPC methods are Configuration File Download, Firmware upgrade,
Get Parameter Value, Set Parameter Value, Reboot, and the upload and download files.
User's Manual 94 Document #: LTRT-12813