Pre-Configured Ip-To-Ip Routing Rules; Normal Mode - AudioCodes Mediant 800B MSBR User Manual

40.4

Pre-Configured IP-to-IP Routing Rules

For the CRP application, the IP-to-IP Routing table is pre-configured with IP-to-IP routing
rules. These rules depend on the configured Call Survivability mode, as described in
''Configuring Call Survivability Mode'' on page 578.
Notes:
•
The IP-to-IP Routing table is read-only.
•
For accessing the IP-to-IP Routing table and for a description of its parameters,
see ''Configuring SBC IP-to-IP Routing Rules'' on page 552.

40.4.1 Normal Mode

The pre-configured IP-to-IP routing rules for the Normal CRP call survivability mode are
shown in the table below:
Table 40-2: Pre-Configured IP-to-IP Routing Rules for CRP Normal Mode
Index Source IP
Group ID /
Emergency
1 *
3 1
4 1
5 1
6 2
1
7 2
8 3
9 3
Note 1: Index 7 appears only if the CRPGatewayFallback parameter is enabled (see
''Configuring PSTN Fallback'' on page 582).
User's Manual
Request Destination
Type Type
OPTIONS Dest
Address
All IP Group
All IP Group
All IP Group
All IP Group
All IP Group
All IP Group
All IP Group
Destination Destination
IP Group ID Address
- Internal
2
1
3
3
3
2
1
580
Mediant 800B MSBR
Alternative Route
Options
Route Row
- Route Row
- Alternative
- Alternative
- Route Row
- Route Row
- Route Row
- Alternative
Document #: LTRT-12813