AudioCodes Mediant 800B MSBR User Manual page 316

4. Click Submit, and then save ("burn") your settings to flash memory.
Table 23-5: IP Profile Settings Table Parameter Descriptions
Parameter
Common
Web: Index
[IpProfile_Index]
Web: Profile Name
CLI: profile-name
[IpProfile_ProfileName]
Web: Profile Preference
CLI: ip-preference
[IpProfile_IpPreference]
Web: Dynamic Jitter Buffer Minimum
Delay
CLI: jitter-buffer-minimum-delay
[IpProfile_JitterBufMinDelay]
Web: Dynamic Jitter Buffer Optimization
Factor
CLI: jitter-buffer-optimization-factor
[IpProfile_JitterBufOptFactor]
Web: RTP IP DiffServ
CLI: rtp-ip-diffserv
[IpProfile_IPDiffServ]
Web: Signaling DiffServ
CLI: signaling-diffserv
[IpProfile_SigIPDiffServ]
Mediant 800B MSBR
Description
Defines an index number for the new table record.
Defines an arbitrary name to easily identify the IP Profile.
The valid value is a string of up to 20 characters.
Defines the priority of the IP Profile, where 20 is the
highest priority and 1 the lowest priority.
Notes:

If an IP Profile and a Tel Profile apply to the same call,
the coders and other common parameters of the profile
with the highest preference are applied to the call. If
the preference of the profiles is identical, the Tel Profile
parameters are applied.

If the coder lists of both an IP Profile and a Tel Profile
apply to the same call, only the coders common to both
are used. The order of the coders is determined by the
preference.

This parameter is applicable only to the Gateway
application.
Defines the minimum delay (in msec) of the device's
dynamic Jitter Buffer.
The valid range is 0 to 150. The default delay is 10.
Notes:

For more information on the Jitter Buffer, see Dynamic
Jitter Buffer Operation on page 190.

The corresponding global parameter is
DJBufMinDelay.
Defines the Dynamic Jitter Buffer frame error/delay
optimization factor.
The valid range is 0 to 12. The default factor is 10.
Notes:

For data (fax and modem) calls, set this parameter to
12.

For more information on Jitter Buffer, see Dynamic
Jitter Buffer Operation on page 190.

The corresponding global parameter is
DJBufOptFactor.
Defines the DiffServ value for Premium Media class of
service (CoS) content.
The valid range is 0 to 63. The default is 46.
Note: The corresponding global parameter is
PremiumServiceClassMediaDiffServ.
Defines the DiffServ value for Premium Control CoS
content (Call Control applications).
316
Mediant 800B MSBR
Document #: LTRT-12813