4.
Open the Interface Table page (Configuration tab > VoIP menu > Network > IP
Interfaces Table).
5.
Select the 'Index' radio button corresponding to the OAMP + Media + Control
application type, and then click Edit.
6.
Change the IP address to correspond with your network IP addressing scheme, for
example:
•
IP Address: 10.8.6.86
•
Prefix Length: 24 (for 255.255.255.0)
•
Gateway: 10.8.6.85
7.
Click Submit.
8.
Save your settings by resetting the device with a flash burn (see ''Resetting the
Device'' on page 589).
9.
Disconnect the device from the PC and cable the device to your network. You can
now access the management interface using the new OAMP IP address.
Note:
When you complete the above procedure, change your PC's IP address to
correspond with your network requirements.
User's Manual
32
Mediant 800B MSBR
Document #: LTRT-12813