AudioCodes Mediant 800B MSBR User Manual page 389

Mediant 800B MSBR
Note:
context'. In such a configuration, a Tel-to-IP call uses the first matching rule in the
table.
Table 27-6: Phone Context Table Parameter Description
Parameter
Index
[PhoneContext_Index]
Add Phone Context As Prefix
CLI: configure voip > gw
manipulations general-setting
> add-ph-cntxt-as-pref
[AddPhoneContextAsPrefix]
NPI
CLI: npi
[PhoneContext_Npi]
TON
CLI: ton
[PhoneContext_Ton]
Phone Context
CLI: context
[PhoneContext_Context]
Version 6.8
You can configure multiple rows with the same NPI/TON or same SIP 'phone-
Defines an index number for the new table record.
Determines whether the received SIP 'phone-context' parameter is
added as a prefix to the outgoing ISDN Setup message (for digital
interfaces) with called and calling numbers.

[0] Disable (default)

[1] Enable
Defines the Number Plan Indicator (NPI).

[0] Unknown (default)

[1] E.164 Public

[9] Private
For a detailed list of the available NPI/TON values, see Numbering
Plans and Type of Number on page 395.
Defines the Type of Number (TON).

If you selected Unknown as the NPI, you can select Unknown [0].

If you selected Private as the NPI, you can select one of the
following:

[0] Unknown

[1] Level 2 Regional

[2] Level 1 Regional

[3] PSTN Specific

[4] Level 0 Regional (Local)

If you selected E.164 Public as the NPI, you can select one of the
following:

[0] Unknown

[1] International

[2] National

[3] Network Specific

[4] Subscriber

[6] Abbreviated
Defines the SIP 'phone-context' URI parameter.
Description
389
27. Manipulation
Mediant 800B MSBR