AudioCodes Mediant 800B MSBR User Manual page 792

Parameter
CLI: oamp-default-network-src
data/voip
[OAMPDefaultNetworkSource]
CLI: isdn-facility-trace
[FacilityTrace]
Web: Debug Recording
Destination IP
CLI: configure system >
logging > dbg-rec-dest-ip
[DebugRecordingDestIP]
Web: Debug Recording
Destination Port
CLI: configure system >
logging > dbg-rec-dest-port
[DebugRecordingDestPort]
User's Manual
Maintenance Actions page.
Note: For this option to take effect, a device reset is required.

[fb] Flash Memory Burning = Saving configuration with burn to
flash (in the Maintenance Actions page).

[swu] Device Software Update = Software updates (i.e., loading
of cmp file) through the Software Upgrade Wizard.

[ard] Access to Restricted Domains = Access to restricted Web
pages:

(1) ini parameters (AdminPage)

(2) General Security Settings

(3) Configuration File

(5) Software Upgrade Key Status

(7) Web & Telnet Access List

(8) WEB User Accounts

[naa] Non-Authorized Access = Attempts to log in to the Web
interface with a false or empty username or password.

[spc] Sensitive Parameters Value Change = Changes made to
"sensitive" parameters:

(1) IP Address

(2) Subnet Mask

(3) Default Gateway IP Address

(4) ActivityListToLog

[ll] Login and Logout = Web login and logout attempts.
Note: For the ini file parameter, enclose values in single quotation
marks, for example: ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard',
'naa', 'spc'.
Defines the network interface from where the device sends Syslog
messages to a Syslog server.

[0] Data (default) = Syslog messages are sent from the WAN
interface.

[1] VoIP= Syslog messages are sent from the VoIP LAN interface
for OAMP.
Enables ISDN traces of Facility Information Elements (IE) for ISDN
call diagnostics. This allows you to trace all the parameters
contained in the Facility IE and view them in the Syslog.

[0] Disable (default)

[1] Enable
Note: For this feature to be functional, the GWDebugLevel
parameter must be enabled (i.e., set to at least level 1).
Defines the IP address of the server for capturing debug recording.
Defines the UDP port of the server for capturing debug recording.
The default is 925.
792
Mediant 800B MSBR
Description
Document #: LTRT-12813