User Information File For Sbc User Database - AudioCodes Mediant 800B MSBR User Manual

402 , 638002 , Lee , leem, 4321
403 , 638003 , Sue , suer, 8790
404 , 638004 , John , johnd, 7694
405 , 638005 , Pam , pame, 3928
406 , 638006 , Steve , steveg, 1119
407 , 638007 , Fred , frede, 8142
408 , 638008 , Maggie , maggiea , 9807

46.1.5.3 User Information File for SBC User Database

You can use the SBC User Info table for the following:

Registering each user to an external registrar server.

Authenticating (for any SIP request and as a client) each user if challenged by an
external server.

Authenticating as a server incoming user requests (for SBC security).
If the device registers on behalf of users and the users do not perform registration, any SIP
request destined to the user is routed to the Proxy Set associated with the user's IP Group.
You can configure up to 500 users (table rows) in the SBC User Info table. The SBC User
Info table can be configured using any of the following methods:

Web interface - see ''Configuring SBC User Info Table in Web Interface'' on page 618

CLI - see Configuring SBC User Info Table in CLI on page 619

Loadable User Info file - see ''Configuring SBC User Info Table in Loadable Text File''
on page 620
46.1.5.3.1 Configuring SBC User Info Table in Web Interface
The following procedure describes how to configure the SBC User Info table in the Web
interface.
Note: If any User Info file is loaded to the device, all previously configured entries are
removed from the table in the Web interface and replaced with the entries from the
loaded User Info file.

To configure the SBC User Info table in the Web interface:
1. Open the SBC User Info Table page (Configuration tab > VoIP menu > SIP
Definitions > User Information > SBC User Info Table).
2. Click Add; the following dialog box appears:
3. Configure the SBC User Info table parameters according to the table below.
User's Manual
Figure 46-3: SBC User Info Table Page
618
Mediant 800B MSBR
Document #: LTRT-12813