AudioCodes Mediant 800B MSBR User Manual page 566


To configure an IP-to-IP Inbound Manipulation rule:
1. Open the IP to IP Inbound Manipulation page (Configuration tab > VoIP menu > SBC
> Manipulations SBC > IP to IP Inbound).
2. Click Add; the following dialog box appears:
Figure 38-2: IP to IP Inbound Manipulation Page - Add Dialog Box
3. Configure the IP-to-IP inbound manipulation rule according to the parameters
described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 38-1: IP to IP Inbound Manipulation Parameter Descriptions
Parameter
Index
[IPInboundManipulation_Index]
Manipulation Name
CLI: manipulation-name
[IPInboundManipulation_Manipula
tionName]
Matching Characteristics - Rule
Additional Manipulation
CLI: is-additional-manipulation
[IPInboundManipulation_IsAdditio
nalManipulation]
Manipulation Purpose
CLI: purpose
User's Manual
Defines an index number for the new table record.
Defines an arbitrary name to easily identify the manipulation
rule.
The valid value is a string of up to 20 characters. By default,
no value is defined.
Determines whether additional SIP URI user part manipulation
is done for the table entry rule listed directly above it.

[0] No = (Default) Regular manipulation rule (not done in
addition to the rule above it).

[1] Yes = If the above row entry rule matched the call,
consider this row entry as a match as well and perform the
manipulation specified by this rule.
Note: Additional manipulation can only be done on a different
SIP URI, source or destination, to the rule configured in the
row above as configured by the 'Manipulated URI' parameter
(see below).
Defines the purpose of the manipulation:

[0] Normal = (Default) Inbound manipulations affect the
566
Mediant 800B MSBR
Description
Document #: LTRT-12813