Ocsp Parameters - AudioCodes Mediant 800B MSBR User Manual

Parameter
[EnableIDS]
CLI: ids-clear-period
[IDSAlarmClearPeriod]
IDS Policy Table
Web: IDS Policy Table
[IDSPolicy]
IDS Rule Table
Web: IDS Rule Table
[IDSRule]
IDS Match Table
Web: IDS Match Table
[IDSMatch]

67.4.8 OCSP Parameters

The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
Parameter
Web: Enable OCSP Server
EMS: OCSP Enable
User's Manual
Note: For this parameter to take effect, a device reset is required.
Defines the interval (in seconds) after which an IDS alarm is cleared from
the Active Alarms table if no thresholds are crossed during this time.
However, this "quiet" period must be at least twice the Threshold Window
value. For example, if IDSAlarmClearPeriod is set to 20 sec and the
Threshold Window is set to 15 sec, the IDSAlarmClearPeriod parameter
is ignored and the alarm is cleared only after 30 seconds (2 x 15 sec).
The valid value is 0 to 86400. The default is 300.
Defines IDS Policies.
The format of the ini file parameter is:
[ IDSPolicy ]
FORMAT IDSPolicy_Index = IDSPolicy_Name, IDSPolicy_Description;
[ \IDSPolicy ]
For a detailed description of this table, see ''Configuring IDS Policies'' on
page 165.
Defines rules for IDS Policies.
The format of the ini file parameter is:
[ IDSRule ]
FORMAT IDSRule_Index = IDSRule_Policy, IDSRule_RuleID,
IDSRule_Reason, IDSRule_ThresholdScope,
IDSRule_ThresholdWindow, IDSRule_MinorAlarmThreshold,
IDSRule_MajorAlarmThreshold, IDSRule_CriticalAlarmThreshold,
IDSRule_DenyThreshold, IDSRule_DenyPeriod;
[ \IDSRule ]
For a detailed description of this table, see ''Configuring IDS Policies'' on
page 165.
Defines target rules per IDS Policy.
The format of the ini file parameter is:
[ IDSMatch ]
FORMAT IDSMatch_Index = IDSMatch_SIPInterface,
IDSMatch_ProxySet, IDSMatch_Subnet, IDSMatch_Policy;
[ \IDSMatch ]
For a detailed description of this table, see ''Assigning IDS Policies'' on
page 169.
Table 67-31: OCSP Parameters
Enables or disables certificate checking using OCSP.

[0] Disable (default)
804
Mediant 800B MSBR
Description
Description
Document #: LTRT-12813