AudioCodes Mediant 800B MSBR User Manual page 981

Mediant 800B MSBR
Parameter
Manipulation
CLI: prfm-ip-to-tel-dst-map
[PerformAdditionalIP2TELD
estinationManipulation]
Destination Phone Number Manipulation for Tel-to-IP Calls Table
Web: Destination Phone
Number Manipulation Table
for Tel > IP Calls
EMS: SIP Manipulations >
Destination Telcom to IPs
CLI: configure voip > gw
manipulations
NumberMapTel2Ip
[NumberMapTel2IP]
Source Phone Number Manipulation for IP-to-Tel Calls Table
Web: Source Phone Number
Manipulation Table for IP >
Tel Calls
EMS: SIP Manipulations >
Source IP to Telcom
CLI: configure voip > gw
manipulations
SourceNumberMapIp2Tel
[SourceNumberMapIP2Tel]
EMS: Perform Additional
IP2TEL Source Manipulation
CLI: prfm-ip-to-tel-src-map
[PerformAdditionalIP2TELS
ourceManipulation]
Version 6.8
destination number, and this additional rule is also configured in the
manipulation table (NumberMapIP2Tel parameter). This enables you
to configure only a few manipulation rules for complex number
manipulation requirements (that generally require many rules).

[0] = Disable (default)

[1] = Enable
This table parameter manipulates the destination number of Tel-to-IP
calls. The format of the ini file table parameter is as follows:
[NumberMapTel2Ip]
FORMAT NumberMapTel2Ip_Index =
NumberMapTel2Ip_ManipulationName,
NumberMapTel2Ip_DestinationPrefix,
NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress,
NumberMapTel2Ip_NumberType, NumberMapTel2Ip_NumberPlan,
NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight,
NumberMapTel2Ip_Prefix2Add, NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID, NumberMapTel2Ip_
SrcIPGroupID;
[\NumberMapTel2Ip]
For a detailed description of this table, see ''Configuring
Source/Destination Number Manipulation'' on page 373.
This parameter table manipulates the source number for IP-to-Tel
calls. The format of the ini file table parameter is as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_ManipulationName,
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
For a detailed description of this table, see ''Configuring
Source/Destination Number Manipulation'' on page 373.
Enables additional source number manipulation for IP-to-Tel calls.
The additional manipulation is done on the initially manipulated
source number, and this additional rule is also configured in the
manipulation table (SourceNumberMapIP2Tel parameter). This
enables you to configure only a few manipulation rules for complex
number manipulation requirements (that generally require many
981
67. Configuration Parameters Reference
Description
Mediant 800B MSBR