Channel Parameters; Voice Parameters - AudioCodes Mediant 800B MSBR User Manual

Mediant 800B MSBR
Parameter
67.9

Channel Parameters

This subsection describes the device's channel parameters.

67.9.1 Voice Parameters

The voice parameters are described in the table below.
Parameter
Web/EMS: Input Gain
CLI: input-gain
[InputGain]
Web: Voice Volume
EMS: Volume (dB)
CLI: voice-volume
[VoiceVolume]
Version 6.8
The format of the ini file table parameter is as follows:
[TelProfile]
FORMAT TelProfile_Index = TelProfile_ProfileName,
TelProfile_TelPreference, TelProfile_CodersGroupID,
TelProfile_IsFaxUsed, TelProfile_JitterBufMinDelay,
TelProfile_JitterBufOptFactor, TelProfile_IPDiffServ,
TelProfile_SigIPDiffServ, TelProfile_DtmfVolume, TelProfile_InputGain,
TelProfile_VoiceVolume, TelProfile_EnableReversePolarity,
TelProfile_EnableCurrentDisconnect, TelProfile_EnableDigitDelivery,
TelProfile_EnableEC, TelProfile_MWIAnalog, TelProfile_MWIDisplay,
TelProfile_FlashHookPeriod, TelProfile_EnableEarlyMedia,
TelProfile_ProgressIndicator2IP, TelProfile_TimeForReorderTone,
TelProfile_EnableDIDWink, TelProfile_IsTwoStageDial,
TelProfile_DisconnectOnBusyTone, TelProfile_EnableVoiceMailDelay,
TelProfile_DialPlanIndex, TelProfile_Enable911PSAP,
TelProfile_SwapTelToIpPhoneNumbers, TelProfile_EnableAGC,
TelProfile_ECNlpMode, TelProfile_DigitalCutThrough,
TelProfile_EnableFXODoubleAnswer, TelProfile_CallPriorityMode;
[\TelProfile]
For a description of this parameter, see Configuring Tel Profiles on page
311.
Table 67-37: Voice Parameters
Global parameter that defines the pulse-code modulation
(PCM) input (received) gain control level (in decibels). You
can also configure this functionality per specific calls, using
IP Profiles (IpProfile_InputGain) or Tel Profiles. For a
detailed description of this parameter and for configuring
this functionality in the IP Profile table, see ''Configuring IP
Profiles'' on page
Configuring Tel Profiles on page 311.
Note: If this functionality is configured for a specific profile,
the settings of this global parameter is ignored for calls
associated with the profile.
Global parameter that defines the voice gain control (in
decibels). This defines the level of the transmitted (IP-to-
Tel) signal. You can also configure this functionality per
specific calls, using IP Profiles (IpProfile_VoiceVolume) or
Tel Profiles. For a detailed description of this parameter
and for configuring this functionality in the IP Profile table,
see ''Configuring IP Profiles'' on page
Profile table, see Configuring Tel Profiles on page 311.
851
67. Configuration Parameters Reference
Description
Description
314 or in the Tel Profile table, see
314 or in the Tel
Mediant 800B MSBR