AudioCodes Mediant 800B MSBR User Manual page 975

Mediant 800B MSBR
Parameter
Web: Tel2IP Default Redirect
Reason
CLI: tel-to-ip-dflt-redir-rsn
[Tel2IPDefaultRedirectReason
]
Web: Redirect Number SIP to
TEL
EMS: Set IP To Tel Redirect
Screening Indicator
CLI: redir-nb-si-2tel
[SetIp2TelRedirectScreeningI
nd]
Web: Set IP-to-TEL Redirect
Reason
CLI: ip2tel-redir-reason
[SetIp2TelRedirectReason]
Web: Set TEL-to-IP Redirect
Reason
CLI: tel2ip-redir-reason
[SetTel2IpRedirectReason]
Version 6.8
manipulation on the source number (i.e., just before sending to the
Tel side).
Determines the default redirect reason for Tel-to-IP calls when no
redirect reason (or "unknown") exists in the received Q931 ISDN
Setup message. The device includes this default redirect reason in
the SIP History-Info header of the outgoing INVITE.
If a redirect reason exists in the received Setup message, this
parameter is ignored and the device sends the INVITE message with
the reason according to the received Setup message. If this
parameter is not configured (-1), the outgoing INVITE is sent with the
redirect reason as received in the Setup message (if none or
"unknown" reason, then without a reason).

[-1] Not Configured = (Default) Received redirect reason is not
changed

[1] Busy = Call forwarding busy

[2] No Reply = Call forwarding no reply

[9] DTE Out of Order = Call forwarding DTE out of order

[10] Deflection = Call deflection

[15] Systematic/Unconditional = Call forward unconditional
Determines the value of the Redirect Number screening indicator in
ISDN Setup messages.

[-1] Not Configured (default)

[0] User Provided

[1] User Passed

[2] User Failed

[3] Network Provided
Note: This parameter is applicable only to digital PSTN interfaces
(ISDN).
Defines the redirect reason for IP-to-Tel calls. If redirect (diversion)
information is received from the IP, the redirect reason is set to the
value of this parameter before the device sends it on to the Tel.

[-1] Not Configured (default)

[0] Unkown

[1] Busy

[2] No Reply

[3] Network Busy

[4] Deflection

[9] DTE out of Order

[10] Forwarding DTE

[13] Transfer

[14] PickUp

[15] Systematic/Unconditional
Note: This parameter is applicable only to digital PSTN interfaces
(ISDN).
Defines the redirect reason for Tel-to-IP calls. If redirect (diversion)
information is received from the Tel, the redirect reason is set to the
value of this parameter before the device sends it on to the IP.

[-1] Not Configured (default)

[0] Unkown
975
67. Configuration Parameters Reference
Description
Mediant 800B MSBR