Mediant 800B MSBR
54.6
Viewing Static Routes Status
The IP Routing Status Table page displays the status of the static routes. These are routes
configured in the Static Route table (see ''Configuring Static IP Routing'' on page 139) and
routes through the Default Gateway.
The status of the static routes can be one of the following:
"Active": Static route is used by the device.
"Inactive": Static route is not used. When the destination IP address is not on the
same segment with the next hop, or the interface does not exist, the route state
changes to "Inactive".
To view the status of static IP routing:
Open the IP Routing Status Table page (Status & Diagnostics tab > VoIP Status
menu >Static Route Status).
54.7
Viewing Performance Statistics
The Basic Statistics page provides read-only, device performance statistics. This page is
refreshed every 60 seconds. The duration that the currently displayed statistics has been
collected is displayed above the statistics table.
To view performance statistics:
Open the Basic Statistics page (Status & Diagnostics tab > VoIP Status menu >
Performance Statistics).
The duration that the displayed statistics were collected is displayed in seconds above the
table. To reset the performance statistics to zero, click the Reset Statistics button.
Version 6.8
Figure 54-6: IP Routing Status Table Page
Figure 54-7: Basic Statistics Page
681
54. VoIP Status
Mediant 800B MSBR