Mediant 800B MSBR
45
Disabling Analog Ports
You can disable an analog port (FXS or FXO) on the device. When disabled, the port
cannot be used and no signaling is transmitted through the port. In addition, the LED of the
analog port is lit red. By default, all the analog ports are enabled.
To disable an analog port, use the following CLI command:
(config-voip)# interface fxs-fxo
(fxs-fxo)# analog-port-enable <module>/<port> [on|off]
For example, to disable port 2 on module 1:
(fxs-fxo)# analog-port-enable 1/2 off
Version 6.8
597
45. Disabling Analog Ports
Mediant 800B MSBR