Software Upgrade Wizard - AudioCodes Mediant 800B MSBR User Manual

Mediant 800B MSBR
46.3

Software Upgrade Wizard

The Web interface's Software Upgrade Wizard lets you easily upgrade the device's
software version (.cmp file). The wizard also provides you the option to load other files
such as an ini file and auxiliary files (e.g., Call Progress Tone / CPT file). However, loading
a .cmp file is mandatory through the wizard and before you can load any other type of file,
the .cmp file must be loaded.
Notes:
•
You can obtain the latest software files from AudioCodes Web site at
http://www.audiocodes.com/downloads.
•
When you start the wizard, the rest of the Web interface is unavailable. After the
files are successfully installed with a device reset, access to the full Web interface
is restored.
•
If you upgraded your firmware (.cmp file) and the "SW version mismatch" message
appears in the Syslog or Web interface, your Software License Key does not
support the new .cmp file version. If this occurs, contact AudioCodes support for
assistance.
•
Instead of manually upgrading the device, you can use the device's Automatic
Update feature for automatic provisioning (see Automatic Provisioning on page
631).
•
You can also upgrade the device's firmware by loading a .cmp file from an external
USB hard drive connected to the device's USB port. For more information, see
USB Storage Capabilities on page 657.
The following procedure describes how to load files using the Web interface's Software
Upgrade Wizard. Alternatively, you can load files using the CLI:

cmp file:
copy firmware from <URL>

ini or auxiliary file:
copy <ini file or auxiliary file> from <URL>

CLI script file:
copy cli-script from <URL>
Version 6.8 625
46. Software Upgrade
Mediant 800B MSBR