AudioCodes Mediant 800B MSBR User Manual page 283

User's Manual

To configure a Proxy Set:
1. Open the Proxy Sets Table page (Configuration tab > VoIP menu > VoIP Network >
Proxy Sets Table).
2. Configure a Proxy Set according to the parameters described in the table below.
3. Click Submit, and then save ("burn") your settings to flash memory.
Parameter
Web: Proxy Set ID
EMS: Index
CLI: configure voip > voip-network proxy-
set
[ProxySet_Index]
Proxy Address
CLI: voip-network proxy-ip > proxy-
address
[ProxyIp_IpAddress]
Version 6.8
Figure 21-6: Proxy Sets Table Page
Table 21-6: Proxy Sets Table Parameter Description
Description
Defines an index number for the new table record.
Defines the address of the Proxy server. Up to 10
addresses can be configured per Proxy Set.
The address can be defined as an IP address in dotted-
decimal notation (e.g., 201.10.8.1) or FQDN. You can
also specify the port using the following format:

IPv4 address: <IP address>:<port> (e.g.,
201.10.8.1:5060)

IPv6 address: <[IPV6 address]>:<port> (e.g.,
283
21. Control Network
Mediant 800B MSBR