Pinging A Remote Host Or Ip Address - AudioCodes Mediant 800B MSBR User Manual

Multi-service business router; session border controller

Hide thumbs Also See for Mediant 800B MSBR:

Table of Contents

Mediant 800B MSBR

Pinging a Remote Host or IP Address

You can verify the network connectivity with a remote host or IP address by pinging the

network entity.

IPv4: The ping to an IPv4 address can be done from any of the device's VoIP or data-

router interfaces that is configured with an IPv4 address. The ping is done using the

following CLI command:

# ping <IPv4 ip address or host name> source [voip|data]

IPv6: The ping to an IPv6 address can be done only from a data-router interface and

that is configured with an IPv6 address. The ping is done using the following CLI

# ping ipv6 <IPv6 address or host name> source data [vrf | source-address interface|

interface] [size <max. IP packet size>] [repeat <1-300>]

For a complete description of the ping command, refer to the CLI Reference Guide.

IPv6 ping is currently only supported on Ethernet and Fiber interfaces.

64. Pinging a Remote Host or IP Address

Mediant 800B MSBR

Table of Contents