AudioCodes Mediant 800B MSBR User Manual page 278

Parameter
Serving IP Group ID
CLI: serving-ip-group-id
[IPGroup_ServingIPGroup]
SBC Parameters
Classify By Proxy Set
CLI: classify-by-proxy-set
[IPGroup_ClassifyByProxySet]
Max. Number of Registered Users
CLI: max-num-of-reg-users
[IPGroup_MaxNumOfRegUsers]
User's Manual
Description
Notes:

This parameter is applicable only to the IP-to-IP
application.

This parameter is applicable only to User-type IP
Groups.
If configured, INVITE messages initiated from the IP Group
are sent to this Serving IP Group (range 1 to 9). In other
words, the INVITEs are sent to the address defined for the
Proxy Set associated with this Serving IP Group. The
Request-URI host name in the INVITE messages are set to
the value of the 'SIP Group Name' parameter defined for
the Serving IP Group.
Notes:

This parameter is applicable only to the IP-to-IP
application.

If the PreferRouteTable parameter is set to 1, the routing
rules in the Outbound IP Routing table take precedence
over this 'Serving IP Group ID' parameter.

If this parameter is not configured, the INVITE
messages are sent to the default Proxy or according to
the 'Outbound IP Routing table.
Defines whether the incoming INVITE is classified to the IP
Group according to its associated Proxy Set.

[0] Disable

[1] Enable (default)
This classification occurs only if classification according to
the device's database fails to (i.e., received INVITE is not
from a registered user). The classification proceeds with
checking whether the INVITE's IP address (if host names,
then according to the dynamically resolved IP address list)
is defined for a Proxy Set ID (in the Proxy Set table). If a
Proxy Set ID has such an IP address, the device classifies
the INVITE as belonging to the IP Group associated with
this Proxy Set. The Proxy Set ID is assigned to the IP
Group using the IP Group table's 'Proxy Set ID' parameter
(see above).
Notes:

In cases where multiple IP Groups are associated with
the same Proxy Set ID, do not enable this feature. If
enabled, the device is unable to correctly classify the
incoming INVITEs to their appropriate IP Groups.

To enhance security, it is highly recommended to
disable this parameter so that the device can use the
Classification table rules to classify the call. If this
parameter is enabled, the Classification table is not used
if an associated Proxy Set is found.

This parameter is applicable only to Server-type IP
Groups.
Defines the maximum number of users in this IP Group that
can register with the device. By default, no limitation exists
for registered users.
278
Mediant 800B MSBR
Document #: LTRT-12813