AudioCodes Mediant 800B MSBR User Manual page 977

Mediant 800B MSBR
Parameter
CLI: rep-calling-w-redir disc-
on-bsy-tone-i
[ReplaceCallingWithRedirectN
umber]
Web/EMS: Add Trunk Group
ID as Prefix
CLI: trkgrpid-prefix
[AddTrunkGroupAsPrefix]
Web: Add Trunk ID as Prefix
EMS: Add Port ID As Prefix
CLI: trk-id-as-prefix
[AddPortAsPrefix]
Web/EMS: Add Trunk Group
ID as Prefix to Source
CLI: trkgrpid-pref2source
[AddTrunkGroupAsPrefixTo
Source]
Web: Replace Empty
Destination with B-channel
Version 6.8
Notes:

For digital interfaces: If the incoming ISDN-to-IP call includes a
Redirect Number, this number is overridden by the new called
number if this parameter is set to [1] or [2].

You can also use this feature for IP-to-Tel calls, by configuring
this parameter per IP Profile (IpProfile_CopyDest2RedirectNum).
For more information, see Configuring IP Profiles on page 314.
Enables the replacement of the calling number with the redirect
number for ISDN-to-IP calls.

[0] = Disable (default)

[1] = The calling name is removed and left blank. The outgoing
INVITE message excludes the redirect number that was used to
replace the calling number. The replacement is done only if a
redirect number is present in the incoming Tel call.

[2] = Manipulation is done on the new calling party number (after
manipulation of the original calling party number, using the
Tel2IPSourceNumberMappingDialPlanIndex parameter), but
before the regular calling or redirect number manipulation:

If a redirect number exists, it replaces the calling party
number. If there is no redirect number, the calling number is
left unchanged.

If there is a calling "display" name, it remains unchanged.

The redirect number remains unchanged and is included in
the SIP Diversion header.
Determines whether the Trunk Group ID is added as a prefix to the
destination phone number (i.e., called number) for Tel-to-IP calls.

[0] No = (Default) Don't add Trunk Group ID as prefix.

[1] Yes = Add Trunk Group ID as prefix to called number.
Notes:

This option can be used to define various routing rules.

To use this feature, you must configure the Trunk Group IDs (see
Configuring Trunk Group Table on page 365).
Determines whether or not the slot number/port number/Trunk ID is
added as a prefix to the called (destination) number for Tel-to-IP
calls.

[0] No (Default)

[1] Yes
If enabled, the device adds the following prefix to the called phone
number: slot number (a single digit in the range of 1 to 6) and port
number/Trunk ID (single digit in the range 1 to 8). For example, for
the first trunk/channel located in the first slot, the number "11" is
added as the prefix.
This option can be used to define various routing rules.
Determines whether the device adds the Trunk Group ID (from
where the call originated) as the prefix to the calling number (i.e.
source number).

[0] No (default)

[1] Yes
Determines whether the internal channel number is used as the
destination number if the called number is missing.
977
67. Configuration Parameters Reference
Description
Mediant 800B MSBR