AudioCodes Mediant 800B MSBR User Manual page 251

User's Manual
Parameter
Monitored Parameter
CLI: monitored-parameter
[QOEColorRules_monitoredParam]
Direction
CLI: direction
[QOEColorRules_direction]
Sensitivity Level
CLI: sensitivity-level
[QOEColorRules_profile]
Green Yellow Threshold
CLI: green-yellow-threshold
[QOEColorRules_GreenYellowThreshold]
Green Yellow Hysteresis
CLI: green-yellow-hysteresis
[QOEColorRules_GreenYellowHysteresis]
Version 6.8
Description
Defines the parameter to monitor and report.

[0] MOS (default)

[1] Delay

[2] Packet Loss

[3] Jitter

[4] RERL [Echo]
Defines the monitoring direction.

[0] Device Side (default)

[1] Remote Side
Defines the sensitivity level of the thresholds.

[0] User Defined = Need to define the thresholds in
the parameters described below.

[1] Low = Pre-configured low sensitivity threshold
values. Thus, reporting is done only if changes in
parameters' values are significant.

[2] Medium = (Default) Pre-configured medium
sensitivity threshold values.

[3] High = Pre-configured high sensitivity threshold
values. Thus, reporting is done for small
fluctuations in parameter values.
Defines the parameter threshold values between
Green (good quality) and Yellow (medium quality)
states.
The valid threshold values are as follows:

MOS values are in multiples of 10. For example, to
denote a MOS of 3.2, the value 32 (i.e., 3.2*10)
must be entered.

Delay values are in msec.

Packet Loss values are in percentage (%).

Jitter is in msec.

Echo measures the Residual Echo Return Loss
(RERL) in dB.
Defines the fluctuation (change) from the value
configured for the Green-Yellow threshold. When the
threshold is exceeded by this hysteresis, the device
sends a report to the SEM indicating this change.
Note: If the monitored parameter crosses two
thresholds at once (e.g., from Green to Red), the
device ignores the hysteresis value and reports the
call state change to the SEM.
251
20. Quality of Experience
Mediant 800B MSBR