AudioCodes Mediant 800B MSBR User Manual page 617

Mediant 800B MSBR

To view a specific entry (example):
(sip-def-proxy-and-reg)# user-info gw-user-info <index, e.g.,
0>
(gw-user-info-0)# display
pbx-ext (405)
global-phone-num (405)
display-name (Ext405)
username (user405)
password (0aGzoKfh5uI=)
status (not-resgistered)

To search a user by pbx-ext:
(sip-def-proxy-and-reg)# user-info find <pbx-ext e.g., 405>
405: Found at index 0 in GW user info table, not registered
46.1.5.2.3 Configuring GW User Info Table in Loadable Text File
The GW User Info table can be configured as a User Info file using a text-based file (*.txt).
This file can be created using any text-based program such as Notepad. You can load the
User Info file using any of the following methods:

Web interface - see ''Loading Auxiliary Files'' on page 599

ini file, using the UserInfoFileName parameter - see ''Auxiliary and Configuration File
Name Parameters'' on page 773

Automatic Update mechanism, using the UserInfoFileURL parameter - see Automatic
Update Mechanism
To add mapping rules to the User Info file, use the following syntax:
[ GW ]
FORMAT
PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
Where:

[ GW ] indicates that this part of the file is the GW User Info table

PBXExtensionNum is the PBX extension number (up to 10 characters)

GlobalPhoneNum is the "global" phone number (up to 20 characters) for the IP side

DisplayName is the Caller ID (string of up to 30 characters) of the PBX extension

UserName is the username (string of up to 40 characters) for registering the user
when authentication is necessary

Password is the password (string of up to 20 characters) for registering the user when
authentication is necessary
Each line in the file represents a mapping rule of a single PBX extension user.
Notes:
•
Make sure that the last line in the User Info file ends with a carriage return (i.e., by
pressing the <Enter> key).
•
To modify the GW User Info table using a User Info file, you need to load to the
device a new User Info file containing your modifications.
Below is an example of a configured User Info file:
[ GW ]
FORMAT
PBXExtensionNum,GlobalPhoneNum,DisplayName,UserName,Password
401 , 638001 , Mike , miked , 1234
Version 6.8 617
46. Software Upgrade
Mediant 800B MSBR