AudioCodes Mediant 800B MSBR User Manual page 260


To configure a Media Realm:
1. Open the Media Realm Table page (Configuration tab > VoIP menu > VoIP Network
> Media Realm Configuration).
2. Click Add; the following dialog box appears:
Figure 21-1: Media Realm Page - Add Record Dialog Box
3. Configure the Media Realm according to the parameters described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 21-1: Media Realm Table Parameter Descriptions
Parameter
Index
[CpMediaRealm_Index]
Media Realm Name
CLI: name
[CpMediaRealm_MediaRealmName]
IPv4 Interface Name
CLI: ipv4
[CpMediaRealm_IPv4IF]
IPv6 Interface Name
CLI: ipv6if
[CpMediaRealm_IPv6IF]
Port Range Start
CLI: port-range-start
[CpMediaRealm_PortRangeStart]
User's Manual
Defines an index number for the new table record.
The valid value is 0 to 63.
Defines an arbitrary name to easily identify the Media Realm.
The valid value is a string of up to 40 characters.
Notes:

This parameter is mandatory.

The name assigned to the Media Realm must be unique.
Assigns an IPv4 network interface to the Media Realm. This
is the name of the interface as configured in the 'Interface
Name' field of the Interface table.
Assigns an IPv6 network interface to the Media Realm. This
is the name of the interface as configured for the 'Interface
Name' field of the Interface table.
Defines the starting port for the range of Media interface UDP
ports.
Notes:

You must either configure all Media Realms with port
ranges or all without; not some with and some without.

The available UDP port range is according to the
BaseUDPport parameter. For more information, see
''Configuring RTP Base UDP Port'' on page 194.

260
Mediant 800B MSBR
Description
Document #: LTRT-12813