AudioCodes Mediant 800B MSBR User Manual page 61

User's Manual
The table below describes the areas of the Home page.
Item #
1 Displays the highest severity of an active alarm raised (if any) by the device:

Green = No alarms

Red = Critical alarm

Orange = Major alarm

Yellow = Minor alarm
To view active alarms, click the Alarms area to open the Active Alarms page (see
Viewing Active Alarms on page 665).
2 Module slot number.
3 Module interface type (e.g., FXS, FXO, and DIGITAL).
4 Module status icon:

(green): Module has been inserted or is correctly configured

(gray): Module was removed and "Reserved" is displayed

(red): Module failure and "Failure" is displayed
5 Port (trunk or channel) status icon.
Icon
(gray)
(green)
(yellow)
(red)
(blue)
(orange)
(dark orange)
Version 6.8
Table 8-7: Home Page Description
Description
Trunk Description
(Digital Module)
Disable: Trunk not
configured (not in use)
Active - OK: Trunk
synchronized
RAI Alarm: Remote Alarm
Indication (RAI), also known
as the Yellow Alarm
LOS/LOF Alarm: Loss due to
LOS (Loss of Signal) or LOF
(Loss of Frame)
AIS Alarm: Alarm Indication
Signal (AIS), also known as
the Blue Alarm
D-Channel Alarm: D-channel
alarm
NFAS Alarm
61
8. Web-Based Management
Channel Description
(Analog Modules)
Idle: Channel is currently on-hook
Call Connected: Active RTP stream
-
Not Connected: No FXO line is
connected to this port or port out of
service due to Serial Peripheral
Interface (SPI) failure (applicable
only to FXO interfaces)
Handset Offhook: Channel is off-
hook, but there is no active RTP
session
-
-
Mediant 800B MSBR