AudioCodes Mediant 800B MSBR User Manual page 572

Parameter
Remove From Right
CLI: remove-from-right
[IPOutboundManipulation_Remove
FromRight]
Leave From Right
CLI: leave-from-right
[IPOutboundManipulation_LeaveFr
omRight]
Prefix to Add
CLI: prefix-to-add
[IPOutboundManipulation_Prefix2A
dd]
Suffix to Add
CLI: suffix-to-add
[IPOutboundManipulation_Suffix2A
dd]
Privacy Restriction Mode
CLI: privacy-restriction-mode
[IPOutboundManipulation_PrivacyR
estrictionMode]
User's Manual
Defines the number of digits to remove from the right of the
manipulated item prefix. For example, if you enter 3 and the
user name is "john", the new user name is "j".
Defines the number of digits to keep from the right of the
manipulated item.
Defines the number or string to add in the front of the
manipulated item. For example, if you enter 'user' and the
user name is "john", the new user name is "userjohn".
If you set the 'Manipulated Item' parameter to Source URI or
Destination URI, you can configure this parameter to a
string of up 49 characters. If you set the 'Manipulated Item'
parameter to Calling Name, you can configure this
parameter to a string of up 36 characters.
Defines the number or string to add at the end of the
manipulated item. For example, if you enter '01' and the user
name is "john", the new user name is "john01".
If you set the 'Manipulated Item' parameter to Source URI or
Destination URI, you can configure this parameter to a
string of up 49 characters. If you set the 'Manipulated Item'
parameter to Calling Name, you can configure this
parameter to a string of up 36 characters.
Determines user privacy handling (i.e., restricting source
user identity in outgoing SIP dialogs).

[0] Transparent = (Default) No intervention in SIP privacy.

[1] Don't change privacy = The user identity remains the
same as in the incoming SIP dialog. If a restricted
number exists, the restricted presentation is normalized
as follows:

From URL header: anonymous@anonymous.invalid.

If a P-Asserted-Identity header exists (either in the
incoming SIP dialog or added by the device), a
Privacy header is added with the value "id".

[2] Restrict = The user identity is restricted (the restricted
presentation is as mentioned above).

[3] Remove Restriction = The device attempts to reveal
the user identity by setting user values in the From
header and removing the privacy "id" value if the Privacy
header exists.
If the From header user is anonymous, the value is taken
from the P-Preferred-Identity, P-Asserted-Identity, or
Remote-Party-ID header (if exists).
The device identifies an incoming user as restricted if one of
the following exists:

From header user is anonymous.

P-Asserted-Identity and Privacy headers contain the
value "id".
Note: All restriction logic is performed after the user number
has been manipulated.
572
Mediant 800B MSBR
Description
Document #: LTRT-12813