AudioCodes Mediant 800B MSBR User Manual page 353

Mediant 800B MSBR
Table 25-1: CAS State Machine Parameters Description
Parameter
Generate Digit On Time
[CasStateMachineGenerateDigitOnTi
me]
Generate Inter Digit Time
[CasStateMachineGenerateInterDigit
Time]
DTMF Max Detection Time
[CasStateMachineDTMFMaxOnDetect
ionTime]
DTMF Min Detection Time
[CasStateMachineDTMFMinOnDetect
ionTime]
MAX Incoming Address Digits
[CasStateMachineMaxNumOfIncomin
gAddressDigits]
MAX Incoming ANI Digits
[CasStateMachineMaxNumOfIncomin
gANIDigits]
Collet ANI
[CasStateMachineCollectANI]
Digit Signaling System
[CasStateMachineDigitSignalingSyst
em]
Version 6.8
Generates digit on-time (in msec).
The value must be a positive value. The default is -1 (use
value from CAS state machine).
Generates digit off-time (in msec).
The value must be a positive value. The default is -1 (use
value from CAS state machine).
Detects digit maximum on time (according to DSP
detection information event) in msec units.
The value must be a positive value. The default is -1 (use
value from CAS state machine).
Detects digit minimum on time (according to DSP detection
information event) in msec units. The digit time length must
be longer than this value to receive a detection. Any
number may be used, but the value must be less than
CasStateMachineDTMFMaxOnDetectionTime.
The value must be a positive value. The default is -1 (use
value from CAS state machine).
Defines the limitation for the maximum address digits that
need to be collected. After reaching this number of digits,
the collection of address digits is stopped.
The value must be an integer. The default is -1 (use value
from CAS state machine).
Defines the limitation for the maximum ANI digits that need
to be collected. After reaching this number of digits, the
collection of ANI digits is stopped.
The value must be an integer. The default is -1 (use value
from CAS state machine).
In some cases, when the state machine handles the ANI
collection (not related to MFCR2), you can control the state
machine to collect ANI or discard ANI.

[0] No = Don't collect ANI.

[1] Yes = Collect ANI.

[-1] Default = Default value - use value from CAS state
machine.
Defines which Signaling System to use in both directions
(detection\generation).

[0] DTMF = Uses DTMF signaling.

[1] MF = Uses MF signaling (default).

[-1] Default = Default value - use value from CAS state
machine.
353
25. Digital PSTN
Description
Mediant 800B MSBR