AudioCodes Mediant 800B MSBR User Manual page 570

Parameter
Matching Characteristics - Rule
Additional Manipulation
CLI: is-additional-manipulation
[IPOutboundManipulation_IsAdditio
nalManipulation]
Source IP Group ID
CLI: src-ip-group-id
[IPOutboundManipulation_SrcIPGro
upID]
Destination IP Group ID
CLI: dst-ip-group-id
[IPOutboundManipulation_DestIPGr
oupID]
Source Username Prefix
CLI: src-user-name-prefix
[IPOutboundManipulation_SrcUser
namePrefix]
Source Host
CLI: src-host
[IPOutboundManipulation_SrcHost]
Destination Username Prefix
CLI: dst-user-name-prefix
[IPOutboundManipulation_DestUse
rnamePrefix]
Destination Host
CLI: dst-host
[IPOutboundManipulation_DestHos
t]
Calling Name Prefix
CLI: calling-name-prefix
[IPOutboundManipulation_CallingN
amePrefix]
Message Condition
CLI: message-condition
[IPOutboundManipulation_Message
Condition]
Request Type
User's Manual
Determines whether additional manipulation is done for the
table entry rule listed directly above it.

[0] No = (Default) Regular manipulation rule - not done in
addition to the rule above it.

[1] Yes = If the previous table row entry rule matched the
call, consider this row entry as a match as well and
perform the manipulation specified by this rule.
Note: Additional manipulation can only be done on a
different item (source URI, destination URI, or calling name)
to the rule configured in the row above (configured by the
'Manipulated URI' parameter).
Defines the IP Group from where the INVITE is received.
The default value is -1 (i.e., any IP Group).
Defines the IP Group to where the INVITE is to be sent.
The default value is -1 (i.e., any IP Group).
Defines the prefix of the source SIP URI user name, typically
used in the SIP From header.
The default value is the asterisk (*) symbol (i.e., any source
username prefix). The prefix can be a single digit or a range
of digits. For available notations, see ''Dialing Plan Notation
for Routing and Manipulation'' on page 761.
Defines the source SIP URI host name - full name, typically
in the From header.
The default value is the asterisk (*) symbol (i.e., any source
host name).
Defines the prefix of the destination SIP URI user name,
typically located in the Request-URI and To headers.
The default value is the asterisk (*) symbol (i.e., any
destination username prefix). The prefix can be a single digit
or a range of digits. For available notations, see ''Dialing
Plan Notation for Routing and Manipulation'' on page 761.
Defines the destination SIP URI host name - full name,
typically located in the Request-URI and To headers.
The default value is the asterisk (*) symbol (i.e., any
destination host name).
Defines the prefix of the calling name (caller ID). The calling
name appears in the SIP From header.
The valid value is a string of up to 37 characters. By default,
no prefix is defined.
Assigns a Message Condition rule as a matching
characteristic. Message Condition rules define required SIP
message formats. For configuring Message Condition rules,
see ''Configuring Message Condition Rules'' on page 551.
Defines the SIP request type to which the manipulation rule
570
Mediant 800B MSBR
Description
Document #: LTRT-12813