AudioCodes Mediant 800B MSBR User Manual page 146

Note: If you configure the Internal SRV table, the device initially attempts to resolve a
domain name using this table. If the domain is not configured in the table, the device
performs a Service Record (SRV) resolution using an external DNS server,
configured in the Interface table (see ''Configuring IP Network Interfaces'' on page
130).
The following procedure describes how to configure the Internal SRV table in the Web
interface. You can also configure this using the table ini file parameter, SRV2IP or CLI
command, configure voip > voip-network dns srv2ip.

To configure an SRV rule:
1. Open the Internal SRV Table page (Configuration tab > VoIP menu > Network >
DNS > Internal SRV Table).
2. Click Add; the following dialog box appears:
3. Configure an SRV rule according to the parameters described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 16-15: Internal SRV Table Parameter Descriptions
Parameter
Web: Domain Name
CLI: domain-name
[Srv2Ip_InternalDomain]
User's Manual
Figure 16-8: Internal SRV Table Page
Defines the host name to be translated.
The valid value is a string of up to 31 characters.
146
Mediant 800B MSBR
Description
Document #: LTRT-12813