AudioCodes Mediant 800B MSBR User Manual page 288

Parameter
Web/EMS: TLS Context Index
CLI: tls-context-index
[ProxySet_TLSContext]
User's Manual
Description
Assigns a TLS Context (SSL/TLS certificate) to the
Proxy Set. The TLS Context is assigned by index
number, as configured in the TLS Contexts table.

Incoming calls: If the 'Transport Type' parameter
(above) is set to TLS and the incoming call is
successfully classified to an IP Group based on this
Proxy Set, this TLS Context is used. If the 'Transport
Type' parameter is set to UDP or classification to this
Proxy Set fails, this TLS Context is not used. Instead,
the device uses the TLS Context configured for the
SIP Interface (see ''Configuring SIP Interfaces'' on
page 267) used for the call; otherwise, the default
TLS Context (ID 0) is used.

Outgoing calls: If the 'Transport Type' parameter
(above) is set to TLS and the outgoing call is sent to
an IP Group that is associated with this Proxy Set,
this TLS Context is used. Instead, the device uses
the TLS Context configured for the SIP Interface
used for the call; otherwise, the default TLS Context
(ID 0) is used. If the 'Transport Type' parameter is set
to UDP, the device uses UDP to communicate with
the proxy and no TLS Context is used.
For more information about how certificates are
associated with calls and for configuring TLS Contexts,
see ''Configuring SSL/TLS Certificates'' on page 109.
288
Mediant 800B MSBR
Document #: LTRT-12813