User's Manual
Parameter
Web: Jitter Compensation
CLI: sbc-jitter-compensation
[IpProfile_SBCJitterCompensation]
Version 6.8
Note: The corresponding global parameter is
SBCRTCPMode.
Enables the on-demand jitter buffer for SBC calls. This
jitter buffer can be used when other functionality such as
voice transcoding are not done on the call. This jitter
buffer is useful when incoming packets are received at
inconsistent intervals (i.e., packet delay variation). The
jitter buffer stores the packets and sends them out at a
constant rate (according to the coder's settings).
[0] Disable (default)
[1] Enable
Notes:
The jitter buffer parameters, 'Dynamic Jitter Buffer
Minimum Delay' (DJBufMinDelay) and 'Dynamic Jitter
Buffer Optimization Factor' (DJBufOptFactor) can be
used to configure minimum packet delay only when
transcoding is employed.
This functionality may require DSP resources. For
more information, contact your AudioCodes sales
representative.
341
23. Coders and Profiles
Description
Mediant 800B MSBR