AudioCodes Mediant 800B MSBR User Manual page 619

Mediant 800B MSBR
4. Click Submit.
5. To save the changes to flash memory, see ''Saving Configuration'' on page 592.
To register a user, select the user's table entry, and then from the Action button's drop-
down list, choose Register. To un-register a user, select the user, and then from the
Action button's drop-down list, choose Un-Register.
Table 46-3: SBC User Info Table Parameter Descriptions
Parameter
Index
[SBCUserInfoTable_Index]
Local User
[SBCUserInfoTable_LocalUser]
Username
[SBCUserInfoTable_Username]
Password
[SBCUserInfoTable_Password]
IP Group ID
[SBCUserInfoTable_IPGroupID]
Status
[SBCUserInfoTable_Status]
46.1.5.3.2 Configuring SBC User Info Table in CLI
The SBC User Info table can be configured in the CLI using the following commands:

To add and/or modify a user (example):
# configure voip
(config-voip)# sip-definition proxy-and-registration
(sip-def-proxy-and-reg)# user-info sbc-user-info <index, e.g.,
1>
(sbc-user-info-1)# username JohnDee
(sbc-user-info-1)# <activate | exit>

To delete a specific user, use the no command:
(sip-def-proxy-and-reg)# no user-info sbc-user-info <index,
e.g., 1>

To view all table entries:
(sip-def-proxy-and-reg)# user-info sbc-user-info display
---- sbc-user-info-0 ----
local-user (JohnDee)
username (userJohn)
password (s3fn+fn=)
ip-group-id (1)
status (not-resgistered)
---- sbc-user-info-1 ----
local-user (SuePark)
username (userSue)
password (t6sn+un=)
Version 6.8
Defines an index for the new table record.
Defines the user and is used as the Request-URI user part for the
AOR in the database.
The valid value is a string of up to 10 characters.
Defines the username for registering the user when
authentication is necessary.
The valid value is a string of up to 40 characters.
Defines the password for registering the user when authentication
is necessary.
The valid value is a string of up to 20 characters.
Defines the IP Group ID to which the user belongs and is used as
the Request-URI source host part for the AOR in the database.
(Read-only field) Displays the status of the user - "Registered" or
"Not Registered".
619
46. Software Upgrade
Description
Mediant 800B MSBR