AudioCodes Mediant 800B MSBR User Manual page 274

Parameter
SIP Group Name
CLI: sip-group-name
[IPGroup_SIPGroupName]
Contact User
CLI: contact-user
[IPGroup_ContactUser]
SRD
CLI: srd
[IPGroup_SRD]
Media Realm Name
CLI: media-realm-name
[IPGroup_MediaRealm]
User's Manual
Description

The Proxy Set is applicable only to Server-type IP
Groups.

The SRD configured for this Proxy Set in the Proxy Set
table is automatically assigned to this IP Group (see the
'SRD' field below).

To configure Proxy Sets, see ''Configuring Proxy Sets''
on page 282.
Defines the SIP Request-URI host name used in INVITE
and REGISTER messages sent to this IP Group, or the
host name in the From header of INVITE messages
received from this IP Group.
The valid value is a string of up to 100 characters. The
default is an empty field.
Notes:

If this parameter is not configured, the value of the
global parameter, ProxyName is used instead (see
''Configuring Proxy and Registration Parameters'' on
page 296).

If the IP Group is of User type, this parameter is used
internally as a host name in the Request-URI for Tel-to-
IP initiated calls. For example, if an incoming call from
the device's T1 trunk is routed to a User-type IP Group,
the device first creates the Request-URI
(<destination_number>@<SIP Group Name>), and then
it searches the internal database for a match.
Defines the user part of the From, To, and Contact headers
of SIP REGISTER messages, and the user part of the
Contact header of INVITE messages received from this IP
Group and forwarded by the device to another IP Group.
Notes:

This parameter is applicable only to Server-type IP
Groups.

This parameter is overridden by the 'Contact User'
parameter in the 'Account' table (see ''Configuring
Registration Accounts'' on page 291).
Assigns an SRD to the IP Group.
The default is 0.
Notes:

For this parameter to take effect, a device reset is
required.

To configure SRDs, see Configuring SRDs on page 264.

For Server-type IP Groups, if you assign the IP Group
with a Proxy Set ID (in the 'Proxy Set ID' field), the SRD
field is automatically set to the SRD value assigned to
the Proxy Set in the Proxy Set table.
Assigns a Media Realm to the IP Group. The string value
must be identical (including case-sensitive) to the Media
Realm name defined in the Media Realm table (see
Configuring Media Realms on page 259).
Notes:

For this parameter to take effect, a device reset is
274
Mediant 800B MSBR
Document #: LTRT-12813