Backing Up And Loading Configuration File - AudioCodes Mediant 800B MSBR User Manual

Mediant 800B MSBR
When the device finishes the installation process and resets, the following wizard
page is displayed, showing the installed software version and other files (ini file and
auxiliary files) that you may also have installed:
Figure 46-10: Software Upgrade Process Completed Successfully
13. Click End Process to close the wizard; the Web Login dialog box appears.
14. Enter your login username and password, and then click Login; a message box
appears informing you of the new .cmp file version.
15. Click OK; the Web interface becomes active, reflecting the upgraded device.
46.4

Backing Up and Loading Configuration File

You can save a copy/backup of the device's current configuration settings as an ini file to a
folder on your computer, using the Configuration File page. The saved file includes only
parameters that were modified and parameters with other than default values. The
Configuration File page also allows you to load an ini file to the device. If the device has
"lost" its configuration, you can restore the device's configuration by loading the previously
saved ini file or by simply loading a newly created ini file.
You can also save the current configuration to a remote server or USB and update
configuration from an external USB hard drive connected to the device's USB port. For
more information, see USB Storage Capabilities on page 657.
# copy cli-script to <URL of TFTP/HTTP/HTTPS server or USB>
For example:

Remote server:
# copy cli-script to tftp://192.168.0.3/config-device1.txt

USB:
# copy cli-script to usb://config-device1.txt
Note:
included in the ini file are reset to default settings.
Version 6.8
When loading an ini file using the Configuration File page, parameters not
629
46. Software Upgrade
Mediant 800B MSBR