Mediant 800B MSBR
The flowchart below illustrates the classification process:
Figure 37-1: Classification Process (Identifying IP Group or Rejecting Call)
Note:
database. If the REGISTER message is received from a User-type IP Group, the
device sends the message to the configured destination.
The following procedure describes how to configure Classification rules in the Web
interface. You can also configure Classification rules using the table ini file parameter,
Classification or CLI command, configure voip > sbc routing classification.
Version 6.8
The device saves incoming SIP REGISTER messages in its registration
547
37. Routing SBC
Mediant 800B MSBR