AudioCodes Mediant 800B MSBR User Manual page 287

User's Manual
Parameter
Web/EMS: SRD Index
CLI: voip-network proxy-set > srd-id
[ProxySet_ProxySet_SRD]
Web/EMS: Classification Input
CLI: voip-network proxy-set >
classification-input
[ProxySet_ClassificationInput]
Version 6.8
Description
ProxyRedundancyMode applies.

[0] Parking = The device continues operating with the
redundant (now active) Proxy until the next failure,
after which it operates with the next redundant Proxy.

[1] Homing = The device always attempts to operate
with the primary Proxy. The device switches back to
the primary Proxy whenever it becomes available.
Notes:

To enable this functionality, you must also enable the
Proxy Keep-Alive mechanism (using the 'Enable
Proxy Keep Alive' parameter).

The Homing option can only be used if the 'Enable
Proxy Keep Alive' parameter is set to Using
Options.
Assigns an SRD to the Proxy Set ID.
The default is SRD 0.
Notes:

For this parameter to take effect, a device reset is
required.

To configure SRDs, see Configuring SRDs on page
264.
Defines how the device classifies IP calls to the Proxy
Set.

[0] IP Only = (Default) The call is classified to the
Proxy Set according to its IP address only.

[1] IP + Port + Transport = The call is classified to the
Proxy Set according to its IP address, port, and
transport type.
Notes:

This parameter is applicable only if the IP Group
table's parameter, 'Classify by Proxy Set' is set to
Enable.

This parameter is applicable only to the SBC
application.
287
21. Control Network
Mediant 800B MSBR