Release Reasons In Cdr - AudioCodes Mediant 800B MSBR User Manual

Multi-service business router; session border controller
Hide thumbs Also See for Mediant 800B MSBR:
Table of Contents

Advertisement

Mediant 800B MSBR
Field Name
SipTermDesc
PstnTermReason
LatchedRtpIp
LatchedRtpPort
LatchedT38Ip
LatchedT38Port

55.2.2.4 Release Reasons in CDR

The possible reasons for call termination for the Gateway / IP-to-IP application which is
represented in the CDR field TrmReason are listed below:
"REASON N/A"
"RELEASE_BECAUSE_NORMAL_CALL_DROP"
"RELEASE_BECAUSE_DESTINATION_UNREACHABLE"
"RELEASE_BECAUSE_DESTINATION_BUSY"
"RELEASE_BECAUSE_NOANSWER"
"RELEASE_BECAUSE_UNKNOWN_REASON"
"RELEASE_BECAUSE_REMOTE_CANCEL_CALL"
"RELEASE_BECAUSE_UNMATCHED_CAPABILITIES"
"RELEASE_BECAUSE_UNMATCHED_CREDENTIALS"
"RELEASE_BECAUSE_UNABLE_TO_HANDLE_REMOTE_REQUEST"
"RELEASE_BECAUSE_NO_CONFERENCE_RESOURCES_LEFT"
"RELEASE_BECAUSE_CONFERENCE_FULL"
"RELEASE_BECAUSE_VOICE_PROMPT_PLAY_ENDED"
"RELEASE_BECAUSE_VOICE_PROMPT_NOT_FOUND"
"RELEASE_BECAUSE_TRUNK_DISCONNECTED"
"RELEASE_BECAUSE_RSRC_PROBLEM"
"RELEASE_BECAUSE_MANUAL_DISC"
"RELEASE_BECAUSE_SILENCE_DISC"
"RELEASE_BECAUSE_RTP_CONN_BROKEN"
"RELEASE_BECAUSE_DISCONNECT_CODE"
"RELEASE_BECAUSE_GW_LOCKED"
Version 6.8
Description of SIP termination reason:
SIP Reason header, if exists, for example: SIP ;cause=200 ;text="Call
completed elsewhere".
If no SIP Reason header exists, the description is taken from the
reason text, if exists, of the SIP response code, for example: "417
Unknown Resource-Priority".
If no reason text exists in the SIP response code, the description is
taken from an internal SIP response mapping mechanism. For
example, if the device receives a SIP response "422", it sends in the
CDR "422 Session Interval Too Small method" as the description.
Q.850 protocol termination reason (0-127).
Remote IP address of the incoming RTP stream that the device "latched"
on to as a result of the RTP latching mechanism for NAT traversal.
Remote RTP port of the incoming RTP stream that the device "latched"
on to as a result of the RTP latching mechanism for NAT traversal.
Latching of a new T.38 stream - new IP address
Latching of a new T.38 stream - new port
701
55. Reporting Information to External Party
Description
Mediant 800B MSBR

Advertisement

Table of Contents
loading

Table of Contents