AudioCodes Mediant 800B MSBR User Manual page 922

Parameter
Web/EMS: Outgoing Calls Behavior
CLI: isdn-bits-outgoing-calls-behavior
[ISDNOutCallsBehavior]
User's Manual
specification (default behavior).
Note: When using the ini file to configure the device to
support several ISDNGeneralCCBehavior features, add the
individual feature values. For example, to support both [16]
and [32] features, set ISDNGeneralCCBehavior = 48 (i.e., 16
+ 32).
Determines several behaviour options (bit fields) that
influence the behaviour of the ISDN Stack outgoing calls. To
select options, click the arrow button, and then for each
required option, select 1 to enable. The default is 0 (i.e.,
disable).

[2] USER SENDING COMPLETE =The default behavior
of the device (when this bit is not set) is to automatically
generate the Sending-Complete IE in the Setup
message. This behavior is used when overlap dialing is
not needed. When overlap dialing is needed, set this bit
and the behavior is changed to suit the scenario, i.e.,
Sending-Complete IE is added when required in the
Setup message for Enblock mode or in the last Digit with
Overlap mode.

[16] USE MU LAW = The device sends G.711-m-Law in
outgoing voice calls. When disabled, the device sends
G.711-A-Law in outgoing voice calls.
Note: This option is applicable only to the Korean variant.

[128] DIAL WITH KEYPAD = The device uses the
Keypad IE to store the called number digits instead of the
CALLED_NB IE.
Note: This option is applicable only to the Korean variant
(Korean network). This is useful for Korean switches that
don't accept the CALLED_NB IE.

[256] STORE CHAN ID IN SETUP = The device forces
the sending of a Channel-Id IE in an outgoing Setup
message even if it's not required by the standard (i.e.,
optional) and no Channel-Id has been specified in the
establishment request. This is useful for improving
required compatibility with switches. On BRI lines, the
Channel-Id IE indicates 'any channel'. On PRI lines it
indicates an unused channel ID, preferred only.

[572] USE A LAW = The device sends G.711 A-Law in
outgoing voice calls. When disabled, the device sends
the default G.711-Law in outgoing voice calls.
Note: This option is applicable only to the E10 variant.

[1024] = Numbering plan/type for T1 IP-to-Tel calling
numbers are defined according to the manipulation tables
or according to the RPID header (default). Otherwise, the
plan/type for T1 calls are set according to the length of
the calling number.

[2048] = The device accepts any IA5 character in the
called_nb and calling_nb strings and sends any IA5
character in the called_nb, and is not restricted to
extended digits only (i.e., 0-9,*,#).

[16384] DLCI REVERSED OPTION = Behavior bit used
in the IUA interface groups to indicate that the reversed
format of the DLCI field must be used.
Note: When using the ini file to configure the device to
922
Mediant 800B MSBR
Description
Document #: LTRT-12813