AudioCodes Mediant 800B MSBR User Manual page 24

supported, including PPPoE, PPPoA, and RFC 2684 in both bridged (Ethernet-over-
ATM) and routed (IP-over-ATM) variants. In the EFM mode, the SHDSL port functions
as a logical Ethernet device.

ADSL2+ / VDSL2 (RJ-11 port interfaces)

Optical Fiber, supporting 100 and 1000 Mbps Ethernet

Four E1/T1 WANs

3G Cellular modem using a USB connection - this can be used as the primary WAN
interface or as a WAN backup in case of failure in the WAN connection (provided by
any of the above).
The device is optimized for wire-speed delivery of data, providing up to 12 Ethernet LAN
ports for connecting equipment such as computers and IP phones. These ports are divided
into Gigabit Ethernet and Fast Ethernet interfaces (the number depends on the ordered
configuration), and provide power-over-Ethernet (PoE) capabilities. The device also
supports an optional, Wi-Fi interface, providing wireless LAN 802.11n access point at 2.4
GHz, 3Tx/3Rx enabling data rates of up to 300 Mbps. The Wi-Fi interface also supports
802.11b/802.11g backward compatibility, allowing interoperability of multiple devices with
different types of Wi-Fi
The device also provides an integrated Open Solution Network (OSN) Server module. The
OSN can host a variety of third-party applications such as IP-PBX, Call Center, and
Conferencing.
The device allows full management through its command line interface (CLI) as well as its
HTTP/S-based embedded Web server. The user-friendly Web interface allows remote
configuration using any standard Web browser (such as Microsoft™ Internet Explorer™).
User's Manual
Figure 1-1: Typical Application
24
Mediant 800B MSBR
Document #: LTRT-12813