Viewing Call Routing Status - AudioCodes Mediant 800B MSBR User Manual

54.11 Viewing Call Routing Status

The Call Routing Status page provides you with information on the current routing method
used by the device. This information includes the IP address and FQDN (if used) of the
Proxy server with which the device currently operates.

To view call routing status:

Open the Call Routing Status page (Status & Diagnostics tab > VoIP Status menu >
Call Routing Status).
Parameter
Call-Routing Method
IP Address
State
User's Manual
Figure 54-10: Call Routing Status Page
Table 54-4: Call Routing Status Parameters

Proxy/GK = Proxy server (Proxy Set) is used to route calls. For
configuring Proxy Sets, see ''Configuring Proxy Sets'' on page 282.

Routing Table = Calls are routed using the routing table:

Gateway calls: Outbound IP Routing table (Configuring
Outbound IP Routing Table on page 397)

SBC calls: SBC IP-to-IP Routing table (Configuring SBC IP-to-IP
Routing Rules on page 552)

Not Used = Proxy server isn't defined.

IP address and FQDN (if exists) of the Proxy server with which the
device currently operates.

N/A = Proxy server isn't defined.

OK = Communication with the Proxy server is in order.

Fail = No response from any of the defined Proxies.
686
Mediant 800B MSBR
Description
Document #: LTRT-12813